Posted by Justin on August 09, 1999 at 04:22:59:
In Reply to: remove passenger seat posted by Barbara Brooker on August 08, 1999 at 23:01:34:
Well, if you dont know how to remove the seat here it goes: on the sides under the seat there is a small bolt on each side..take this out, then the main seat will lift off. Next you remove the single bolt on the front of pass. seat..it will then lift off too. And the sissy bars...not easy..there are I believe 3 bolt hanging on to each side of it..and one is only accessible by taking the rear wheel off...unless you have extremely small hands...take these out and it is then off.
There is 1 problem though...the rectifier and voltage regulator are located under the seat as well as the wiring for the tail light....unfortunately it would get quit involved to try and relocate the wirng..and after that is all done there is a bracket welded to the fender that would have to bre removed.
I dont know of anything that you could use to cover it up...so the above would be the rpoute I would take.
And just so i dont sound confused..I am talking about the passenger seat..believe it or not this all has to be done to make a single look.
GOOD LUCK!!
JUSTIN